Architectural & decorative

Decorative (interior)
Decorative (exterior)
Stormcote masonry paint
Chlorinated rubber finishes
Gloss finishes
Special-purpose
Metal Finishing
Wood Care
Microflex Range
Timbercoat Range
Gloss finish
Varnishes
Shellac
Primers and Basecoats
Miscellaneous

Decorative (interior)

Premier Acrylic Matt & Sheen Emulsion
...premium quality matt and sheen emulsion for both trade and DIY use, based on an acrylic polymer. Washability and excellent dirt resistance are built in, with extenders and pigments to give a non toxic, high covering finish.
...for painting all interior surfaces, including high humidity areas such as kitchens and bathrooms. Ideal for plasterboard, brick, hardboard, embossed paper and textured coatings.

Aquabond Acrylic Sealer
Stormcote Stabilising Sealer
[top]


Aquashell Acrylic Eggshell Finish
...advanced pure acrylic aqueous based non yellowing eggshell finish which is highly resistant to steam and condensation and strongly adheres to most surfaces including previously painted gloss and conventional eggshell.
...tough, washable and stain resistant finish which is easily maintained.
...areas subject to high abrasion, steam, water splashing and condensation. Ideal in kitchens, bathrooms, hospital, schools, nurseries, food preparation areas and any environmentally sensitive situations.


See also:
Aquabond Acrylic Sealer
Colour Chart
[top]


Low Odour Eggshell Finish
...low odour eggshell finish which is extremely washable, hard wearing and steam resistant, yet easily maintained. Easy to apply with excellent flow properties and an attractive non glare finish. The product is lead free and VOC compliant.
...Where an easily maintained and washable surface is required, this product is ideal for schools and hospitals when maximum traffic is expected and is well suited in domestic areas, kitchens, bathrooms, steamy atmospheres, hallways and bedrooms.


See also:
Standard Wood Primer
General Purpose Undercoat
Colour Chart
[top]


Flat Wall Finish
...low odour flat wall finish which is hard wearing, steam resistant and easily maintained. Easy to apply with excellent flow properties and a matt velvet finish. This product is lead free and VOC compliant.
...ideal for domestic areas when significant traffic is expected, for example kitchens, bathrooms, hallways and living rooms. Can also be used as an excellent black-board paint.


See also:
Standard Wood Primer
[top]


Aquasheen Acrylic Gloss
...pure acrylic aqueous based gloss finish which is non yellowing, highly resistant to wear, abrasion and impact. Strongly adheres to most surfaces including previously painted gloss and primed woodwork.
... use on areas subject to wear, abrasion, impact where a hard wearing, easily cleaned finish is required.
...ideal in kitchens, bathrooms, domestic areas, schools, nurseries, hospitals and any environmentally sensitive situations.


See also:
Aquabond Acrylic Primer
Aquasheen Acrylic Undercoat
Colour Chart
[top]


Liquid High Gloss
...traditional high quality alkyd based gloss finish for the craftsman where maximum covering, gloss and durability are required. Ideal for building and industrial use, both exterior and interior, on all types of surfaces. Exhibits excellent chalking resistance and colour retention.
...all colours are lead free.
...all interior and exterior surfaces including new and previously painted wood, metal, brick, stone and plaster, where a long lasting low maintenance finish is desired. Ideal for housing and factory painting.


See also:
Standard Wood Primer
General Purpose Undercoat
Colour Chart
[top]


GP Industrial Gloss
...traditional alkyd based gloss finish for general use, where good covering, gloss and durability are required. Ideal for building and industrial use, both interior and exterior on many surfaces.
...all colours are lead free and this product is compliant.
...for interior and exterior surfaces including new and previously painted wood, metal, brick and stone where an economical finish is required. Ideal for general painting and for industrial and agricultural use.


See also:
Standard Wood Primer
General Purpose Undercoat
[top]


Farglo Fluorescent Paint
...highly reflective fluorescent coatings designed for specific areas where a high degree of visibility is essential.
...highly transparent and durable fluorescent pigments dispersed in a non yellowing alkyd binder in four vivid colours.
...can be applied to wood, metal and concrete.
...colour brilliance will not fade and is active to both U.V. and daylight.
...safety equipment, warning signs, docking points, fire equipment, vehicle tailboards and marker buoys.


Recommended systems:
Chlorinated Rubber Finishes
Acrylic Clear Lacquer
[top]


Decorative (exterior)

Stormcote masonry paint

Stormcote Smooth Masonry Paint
...aqueous based acrylic exterior masonry finish with maximum resistance to dirt pick up. Has outstanding proven durability on most masonry surfaces and withstands rain, frost, alkali and extremes of weather. Algae and fungi are controlled by a wide spectrum biocide which is included.
...protection of all exterior masonry, cement, concrete and most other surfaces where a long life durable coating is required with the ability to fill cracks and resist structural movements.
...especially suitable for roughcast and open block work.


See also:
Aquabond Acrylic Sealer
Stormcote Acrylic Sealer
Stormcote Rubberised Sealer
Stormcote Stabilising Sealer
Stormcote Fungicidal Treatment
Colour Chart
[top]


Stormcote Acrylic Sealer
...medium duty aqueous sealer based on an acrylic emulsion with excellent alkali resistance and adhesion to masonry surfaces. Used for stabilising and bonding exterior and interior masonry and cement surfaces prior to application of masonry paint or other decorative coatings. Reduces porosity and provides a well bound durable base.
...ideal for exterior or interior chalky but structurally sound surfaces prior to application of masonry or decorative aqueous paints.

[top]


Stormcote Rubberised Sealer
...heavy duty chlorinated rubber sealer for the treatment of unsound surfaces such as masonry, cement, concrete, alkaline and dusty substrates to produce a tough, well bound base for subsequent masonry and other coatings. Penetrates deeply and has minimum effect on previous coatings which may be present.
...exterior and interior masonry, chalky walls, ceilings and any location where serious surface degradation has occurred and required significant stabilisation.

[top]


Stormcote Stabilising Sealer
...heavy duty solvent based sealer for stabilising and bonding exterior and interior masonry and cement surfaces prior to application of masonry paint or other decorative coatings.
...ideal for exterior or interior chalky or friable surfaces prior to application of masonry or decorative aqueous paints.

[top]


Stormcote Fungicidal Treatment
...this product is based on a wide spectrum biocide which is effective in eliminating the growth of fungi, algae, bacteria and yeasts which occur on many types of structures and are usually seen as black or green growths. The treatment can be used on brick, stone, cement, wood and most interior and exterior surfaces.

...preventative or remedial treatment on walls, ceilings and most other surfaces prior to overcoating with paint or wallpaper.

[top]


Chlorinated rubber

Chlorinated Rubber Finish
...A well served product based on chlorinated rubber giving high chemical resistance. Used in high humidity environments and aggressive exposure conditions. The products perform well on most types of substrate including concrete. Other features include high intercoat adhesion, low moisture permeability and resistance to acids alkalis, oxidants and sea water.
...Where chemical and water resistance are required in aggressive environments. May be applied to most metal surfaces, asbestos and concrete. Ideal for agricultural equipment, fabrications, superstructures, roofs and ship topsides.

Chloriphos Primer
Chlorinated Rubber Zinc Primer MZ70
Floorcote Rubberised Sealer
Stormcote Rubberised Sealer
[top]


Chlorinated Rubber Zinc Primer MZ70
...chlorinated rubber primer which gives high cathodic protection with 70% metallic zinc in the dry film. It exhibits superb adhesion and anti-corrosion properties in extreme environments. This product can be applied down to 0YC.
...for new construction and repair work on superstructures, steel fabrications etc. where a chlorinated rubber finish is to be used and maximum corrosion resistance is required.


Recommended systems:
Chlorinated Rubber Finishes
[top]


Chloriphos Primer
...medium to high build chlorinated rubber primer with a high degree of corrosion resistance for outstanding performance on ferrous structures in aggressive environments.
...this product is highly impervious to water.
...as part of the chlorinated rubber system, Chloriphos gives ideal anti-corrosive properties to metalwork, superstructures, hulls and agricultural equipment where high humidity and aggressive exposure conditions are present. This product can be applied down to 0YC.


Recommended systems:
Chlorinated Rubber Finishes
[top]


Exterior gloss finishes

Farm Oxide
...economical single pack semi-gloss finish based on alkyd resin
...durable lead free pigments.
...for interior and exterior surfaces, including new and previously painted wood, metal, brick and stone. Ideal for general painting in building, industrial and agricultural areas where an easily maintained attractive finish is desired at a low cost.


See also:
Standard Wood Primer
Hi-dur Zinc Phosphate Primer
[top]


GP Industrial Gloss
...traditional alkyd based gloss finish for general use, where good covering, gloss and durability are required. Ideal for building and industrial use, both interior and exterior on many surfaces.
...all colours are lead free and this product is compliant.
...for interior and exterior surfaces including new and previously painted wood, metal, brick and stone where an economical finish is required. Ideal for general painting and for industrial and agricultural use.


See also:
Standard Wood Primer
General Purpose Undercoat
[top]


Special-purpose

Aluminium Reflective 101
A thixotropic high build aluminium pigmented coating formulated on a natural grade bitumen and incorporating a lamella pigment that gives improved resistance to moisture ingress and ultra violet degradation.
• Excellent water repellent properties
• Attractive bright aluminium finish
• Solar reflective - reduces heat through a roof
• High build - reduces application costs
• Good impact resistance and flexibility
Typical uses are:
• Anti-corrosive topcoat for steel tanks and pipelines
• Solar reflective coating for asphalt or concrete roofs
• Waterproofing for concrete structures
• Attractive corrosion protection for steel trusses in roofs etc

[top]


Farglo Fluorescent Paint
...highly reflective fluorescent coatings designed for specific areas where a high degree of visibility is essential.
...highly transparent and durable fluorescent pigments dispersed in a non yellowing alkyd binder in four vivid colours.
...can be applied to wood, metal and concrete.
...colour brilliance will not fade and is active to both U.V. and daylight.
...safety equipment, warning signs, docking points, fire equipment, vehicle tailboards and marker buoys.


Recommended systems:
Chlorinated Rubber Finishes
Acrylic Clear Lacquer
[top]


PC99 Anti-Vandal Coating
...recommended by various police forces as an anti-intruder coating and to act as a deterrent to burglars and vandals against entry into dangerous areas.
...non-oxidising, non-setting coating formulated using a selection of various petroleum derivatives and durable pigments.
...wide working temperature from -20C up to 60C, can be applied to most surfaces, low odour and solvent free.
...drain pipes, sills, tops of wall and fences, garage and porch roofs, flat roofs etc, trees (to discourage theft of eggs), electricity pylons to prevent access to dangerous areas, telegraph poles, lamp posts to prevent climbing.

[top]


Metal Finishing

Plicote Finishes
...a product range based on acrylated rubber giving good weathering properties and adhesion. Used in aggressive exposure conditions, the products perform well on most types of metal surfaces.
...available in two finishes - Standard and Hi-Build.
...where anticorrosion protection and adhesion are required in aggressive environments. May be applied to most metal surfaces. Ideal for agricultural equipment, fabrications, superstructures, roofs and ships topsides.
...due to the mild solvent content, this product is ideal for overcoating and repairing previously painted surfaces with minimal risk of film softening.


See also:
Plicote Zinc Phosphate Primer
Plicote MIO Primer
[top]


Coloured Solution
...reinforced advanced modified alkyd one coat system with added rust inhibitor specially formulated for aggressive environments, that provides a tough resilient barrier, impermeable to air and moisture, effectively sealing out corrosion.
...one coat system (no primer or undercoat necessary), offering good corrosion resistance. Economical with excellent hiding power, lead free colours, no hazardous solvents, may be overcoated next day.
...for industrial, agricultural and domestic use. For example, machinery, gates, drainpipes, warehouse doors, steel frames, steelwork on garages, gates and railings.


Usually a one-coat system, but for optimum performance it can be specified with:
Hi-dur Zinc Phosphate Primer
[top]


Hammercote Hammer Finishes
...high quality styrenated alkyd based enamel available as a hammered metallic finish or a smooth finish. It is a one coat system ideally suited for the decoration and protection of metal work. It is non yellowing, fast drying and oil and grease resistant when fully dried. A colours are lead free.
...for all metal equipment such as tools, casings, metal furniture, gates and railings, interior and exterior. High film build when brushing ensures excellent corrosion resistance.


One-coat system, but may require the following:
Etch Primer (Two Pack)
[top]


Farmline
...fast air drying enamels designed for the coating and refurbishing of agricultural, horticultural and construction machinery components. Based on a pure drying, oil modified alkyd blend with urethane in mixed hydrocarbon solvent.
...primarily suitable for brush and some spray application.
...for finishing or refurbishing machinery components to give a high quality durable finish, particularly where brush application is required. Optimum durability is achieved when used in conjunction with primers.


Specified with:
Farmline Primer
Hi-dur Zinc Phosphate Primer
[top]

Farmline Primer
...a range of air drying alkyd based primer/undercoats primarily suitable for brush application to various substrates.
...suitable as a primer or undercoat for the finish or refurbishing of agricultural or vehicle exteriors in conjunction with Farmline or Procover finishes.


Recommended systems:
Farmline
PU100 Finish
[top]


Bright Aluminium Paint
...high quality heat resistant aluminium paint for decorative and protective use on metalwork. Based on a modified hard resin system pigmented with leafing aluminium to provide good protection and a bright metallic finish.
...withstands heated surfaces up to 150C.
...can be used on most metal surfaces such as ducting, chassis members, tank exteriors, pipework and in a solar reflective role where excessive temperatures need to be limited.


Recommended primers:
Hi-dur Zinc Phosphate Primer
Etch Primer (Two Pack)
[top]


Siliconised Alkyd Enamel
...highly durable exterior quality enamel based on silicone alkyd, containing durable and light fast colour pigments.
...suitable for metal components, the silicone modification provides weather resistance, high wear character and resistance to temperatures of 180C.
...metal components which may be subject to high wear or severe weathering environments and extremes of temperature.
...can also be used on boiler pipes, flare stacks, domestic radiators and exterior fabrications, tanks and components.


Recommended primers:
Hi-dur Zinc Phosphate Primer
Standard MIO Primer
[top]


Farglo Fluorescent Paint
...highly reflective fluorescent coatings designed for specific areas where a high degree of visibility is essential.
...highly transparent and durable fluorescent pigments dispersed in a non yellowing alkyd binder in four vivid colours.
...can be applied to wood, metal and concrete.
...colour brilliance will not fade and is active to both U.V. and daylight.
...safety equipment, warning signs, docking points, fire equipment, vehicle tailboards and marker buoys.


Recommended systems:
Chlorinated Rubber Finishes
Acrylic Clear Lacquer
[top]


Wood Care

Microflex Opaque Wood Treatment
...medium to high build microporous, flexible and highly durable opaque coating for all interior and exterior wood surfaces, including fencing as well as smooth hardwood and softwood surfaces.
...all exterior and interior softwood and hardwood constructional timber including doors, window frames, cladding and barge boards.


See also:
General Purpose Varnish
Marine Varnish
[top]


Microflex Transparent Wood Treatment
...medium build microporous, flexible and highly durable transparent coating for interior and exterior smooth hardwood and softwood surfaces.
...all exterior and interior softwood and hardwood constructional timber including doors, window frames, cladding and barge boards.


See also:
General Purpose Varnish
Marine Varnish
[top]


Microflex Clear Base Coat
...deeply penetrating treatment which provides a strong key to bare wood and strengthens the cellular wood structure.
...contains a surface mould growth inhibitor and is U.V. absorbing without affecting the colour or visible grain of the wood.
...all exterior and interior softwood and hardwood constructional timber including doors, window frames, cladding and barge boards.

[top]


Wood care - Timbercoat

Timbercoat 1 Fenceguard
...low build water based creosote replacement wood treatment.
...microporous, harmless to plants and animal life and offers good protection against water, sunlight and fungal attack. Penetrates deeply into wood but the spreading rates are noticeably higher than creosote, giving a cost effective advantage.
...fences, sheds, rough and smooth sawn softwood and old weathered creosote painted surfaces.


See also:
Stormcote Fungicidal Treatment
[top]


Timbercoat Wood Dipping Concentrate
...protective dipping compound for the protection and colouration of sheds, fencing, panels, posts and other rough cut timber products. Simple to use, being water based, and a safe alternative to creosote.
...after dilution with water it can be used to protect and colour sheds, fencing panels and other rough cut or sawn timber. When dry it gives a long lasting coloured finish which resists water penetration and attack by fungi.
...safe to use and harmless to plants and animals, making it a safe alternative to creosote dipping.


See also:
Stormcote Fungicidal Treatment
[top]


Wood care - gloss finishes

Liquid High Gloss
...traditional high quality alkyd based gloss finish for the craftsman where maximum covering, gloss and durability are required. Ideal for building and industrial use, both exterior and interior, on all types of surfaces. Exhibits excellent chalking resistance and colour retention.
...all colours are lead free.
...all interior and exterior surfaces including new and previously painted wood, metal, brick, stone and plaster, where a long lasting low maintenance finish is desired. Ideal for housing and factory painting.


See also:
Standard Wood Primer
General Purpose Undercoat
Colour Chart
[top]


Wood care - varnishes

General Purpose Varnish
...traditional alkyd based varnish with good weather resistance and flexibility both internally and externally.
...lead free, non toxic and produces a glossy, durable finish.<
...all interior and exterior woodwork either domestic or industrial. Ideal for stained timber, wall boards and maintenance of previously varnished surfaces, and most general varnishing situations.

[top]


Polyurethane Varnish
...polyurethane modified alkyd based varnish which is hard and tough. For use on interior woodwork to provide a wear and chip resistant finish with good resistance to oil, grease and domestic chemicals.
...available in gloss or satin finish.
...excellent for interior high wear areas such as floors, doors and natural wood furniture. Resists knocks, scratches, chips and chemicals.

[top]


Marine Varnish
...phenolic modified alkyd based varnish with superb weather resistance, gloss and flexibility both internally and externally. Gives tougher and more waterproof films than normal varnishes and is ideal for marine environments.
...all interior and exterior woodwork either domestic, industrial or marine. Ideal for boats, stain-treated exposed doors, wall boards and maintenance of previously varnished surfaces.

[top]


Wood care - Shellac

Shellac Clear Varnish
...pure shellac solution in alcohol conforming to BS 1284 for high quality varnishing of furniture.
...can be used where maximum non-yellowing characteristics are required, being a pure lightly coloured resin solution and is a traditional product for furniture coatings.

[top]


Shellac Knotting
...alcohol solution of mixed resins conforming to BS 1336. Principally used for sealing knots in resinous wood to prevent bleeding of subsequent decorative paint coats
...used widely as French polish in furniture restoring.

[top]


Shellac Sanding Sealer
...shellac solution in alcohols for sealing and priming wood.
...specially formulated to provide a quick drying and easily sanded primer for wood for interior use. When dry it sands easily without clogging the paper and provides an excellent smooth base for polishing or brush coating, reducing sinking of the final coats.

[top]


Primers and undercoats

Standard Wood Primer
...traditional non toxic alkyd based wood primer, conforming to BS 5358, This product is totally lead free.
...exterior and interior priming of most soft woods, non oily hardwoods, chipboard and plywood. Ideal for new wood, doors, window frames and skirting, prior to undercoat and finish.

[top]


General Purpose Undercoat
...high quality undercoat traditionally formulated for the craftsman and suitable for interior and exterior use.
...ideal base for decorative gloss finishing systems. All colours are lead free.
...for application to previously painted surfaces including timber, metal, plaster and concrete.

[top]


Aquabond Acrylic Sealer
...medium duty aqueous acrylic based sealer for stabilising and bonding exterior and interior masonry and cement surfaces. Reduces porosity, provides a well bound durable base, excellent alkali resistance and good adhesion to masonry surfaces.
...for exterior or interior chalky but structurally sound surfaces prior to application of masonry or decorative aqueous paints.

[top]


Aquabond Acrylic Primer
...aqueous based acrylic primer, suitable for interior and exterior use and passes all requirements of BS 5082, showing high adhesion under damp conditions, ease and speed of application, fast recoat times, low nail head rusting and good covering power.
...high adhesion ensures successful coating of interior and exterior plaster, cement, hardboard, plywood, new softwood and non resinous hardwoods. Well suited to accept alkyd gloss and eggshell finishes, in addition to Aquabond Acrylic Undercoat.

[top]


Aquasheen Acrylic Undercoat
...pure acrylic copolymer incorporating adhesion promotion.
...superior low odour aqueous based acrylic undercoat complements the Aquasheen Gloss System, has extremely high adhesion to old alkyd gloss surfaces and provides effective level base to maximise surface gloss.
...for most interior surfaces including kitchens, bathrooms, doors, windows.

[top]


Alkali Resisting Primer
...primer sealer for masonry, plaster and alkaline surfaces which inhibits alkaline reaction and prevents alkyd saponification and subsequent adhesion failure. It gives good bonding properties and long term durability.
...interior and exterior use on new plaster, concrete, cement, stucco, asbestos and any alkaline surface. Reduces suction on porous surfaces and is also useful for sealing hardboard.

[top]


Plicote Zinc Phosphate Primer
...medium build acrylated rubber primer with good corrosion resistance on ferrous structures.
...for use in aggressive chemical, U.V. and marine environments.

Plicote HB MIO Primer
Plicote Finishes
[top]


Plicote HB MIO Primer
...high build acrylated rubber MIO primer with a high degree of protection to ferrous structures.
...for use in aggressive chemical, UV and marine environments.

Plicote Zinc Phosphate Primer
Plicote Finishes
[top]


Miscellaneous

Terebine Drier
...blended metallic drier which can be post added to gloss, undercoat, eggshell, and other oil based paints - usually of extended age, or where these are to be used in cold and damp conditions - to improve drying characteristics.
[top]